What are the specifications of the mold?

Update:29-03-2021
Summary:

(1) Mold size and locking screw The size of the templat […]

(1) Mold size and locking screw
The size of the template should be larger than the working area, and the standard template size should be selected. The position configuration of the template locking screw is related to the mold type and template size. Among them, the single engineering molds are most often used to configure the locking screws at the four corners, and the most standard form of work area can be widely used. Long-shaped molds and continuous molds are most commonly used with locking screws at the four corners and middle positions.
(2) The thickness of the template
The thickness of the template is absolutely related to the structure of the mold, the type of stamping processing, the processing force of the stamping, and the precision of the stamping processing. It is difficult to determine the thickness of the mold based on theoretical calculations. Generally, it is determined by experience. The thickness of the template used in the design should be as small as possible, and the mold height and clamping height should be standardized to facilitate purchase and inventory management.

https://www.mould-parts.net/

0
Views: 409