Standard Shoulder Straight Stepped Mould Injection Ejector Pin
M material | Internal hardness | Surface hardness | Heat treatment |
SKD-61 | HRC43° ±2° | HV1000° ±100° | Nitriding |
HRC52° ±2° | HRC52°±2° | Vacuum processing |


E-mail : [email protected]Product Details
Model | D | H | d | L |
Code | 100 | 150 | 200 | 250 | 300 |
JZ004 | 6 | 4 | 2.0 | 40 | 48 | 56 | 73 | 82 |
2.5 | 40 | 48 | 56 | 73 | 82 |
3.0 | 40 | 48 | 56 | 73 | 82 |
7 | 6 | 3.5 | 40 | 48 | 56 | 73 | 82 |
8 | 4.0 | 47 | 52 | 58 | 77 | 87 |
4.5 | 56 | 60 | 65 | 87 | 96 |
9 | 5.0 | 60 | 65 | 70 | 95 | 105 |
10 | 5.5 | 65 | 70 | 80 | 105 | 115 |
6.0 | 70 | 75 | 85 | 115 | 125 |
6.5 | 75 | 80 | 90 | 125 | 135 |
11 | 8 | 7.0 | 80 | 90 | 100 | 135 | 145 |
13 | 8.0 | 80 | 90 | 100 | 135 | 145 |
14 | 9.0 | 91 | 98 | 110 | 146 | 159 |
15 | 10.0 | 102 | 109 | 121 | 160 | 176 |
16 | 11.0 | 122 | 132 | 144 | 201 | 233 |
17 | 12.0 | 122 | 132 | 144 | 201 | 233 |